Dating Hand Planes Start Page

User Tools These tools have been selected with the user in mind. Most have been cleaned and are ready to use except for sharpening and a final tuning. This we leave for the user, knowing that each woodworker may use a different technique. We try to select tools only in the best condition. User tools are for the most part a repeatable, stock item so it is quite possible that the actual tool offered may already be sold. Not to worry, we will most likely have an identical tool of similar quality.

2018 Tour — Online Ticket Application

The stylistic techniques used to date formal furniture such as Chippendale and Hepplewhite simply does not work for American country and primitive furniture. Country furniture does have its styles based predominately on religion and region. The catholic French and the Irish built cupboards with bold moldings, cut out feet, raised panels and they painted their cupboards in bright colors. The puritan New England cabinetmakers built simple unadorned cupboards painted in drab colors.

But there are a number of other factors to consider as well, including the tools that were used to craft a piece and what the individual components look like. Examining these elements individually, as well as furniture pieces in their entirety, will help you learn to correctly date them.

History of Clocks – Types of Clocks: Use of this website constitutes acceptance of the AntiqueClocksPriceGuide. We respect your right to privacy. Please see our Privacy Policy. For copyright complaints and DMCA notices, please visit our copyright infringement page. Baillie; first published by Methuen, London, ; later editions by N. Press, London A listing of clockmakers who flourished until Entries give geographic location, dates and type of work.

I Contains approximately 35, entries, including information for clockmakers who flourished from to It also includes additional information about many of those listed in the original work. Old Clocks and Watches and their Makers by F. Britten; assorted publishers and reprints from – First published in , there were 14 subsequent editions through , with reprints as recent as

Block Plane Dating

I’d never, however, given any thought to the collectibles value of hand tools until a chance conversation with a co-worker. Her husband, a relative Newbie to the world of online auctions, had come home one recent Saturday with an old carpenter’s plane, for which he’d paid a few dollars at a yard sale. He immediately listed it on an auction site. Luckily for collectors , a perusal of online auctions would support the contention that there are still many people out there hosting yard or estate sales who do not appreciate the value of their father’s or grandfather’s hand tools and, thus, such “finds” are not all that uncommon.

Stanley planes comprise an especially popular segment of the collectible-tools market. Many of today’s carpenters value old planes for their quality of construction, and for the fine feel and control of the “hands-on” approach versus the use of power tools.

(The best books are Antique & Collectible Stanley Tools Guide to Identity & Value and Patented Transitional and Metallic Planes in America) TimeTestedTools Dating for Stanley-Bailey’s Hyperkitten.

Price Guide to Antique Tools By Terry Hurley Collector and Antique Store Owner Learn more about antique hand tools Experienced antique tool collectors know that having a price guide to antique tools is a valuable resource when adding pieces to their collections. They also know that a price guide is just as important when selling their tools regardless of the venue. Antique Tool Price Guides: An Important Resource Antique tool collectors know the importance of having a reliable and current price guide.

This is the book they rely on for guidance while searching through antique shops, flea markets and garage sales. It often accompanies them to auction houses and rests on their desks as they browse auction websites. Newcomers to the world of antiquing may wonder what makes antique price guides so important to antique buyers and sellers. The importance lies in the information found in antique price and identification guides.

Guide to Assist in the Identification of Antique Spectacles

Note the indistinct ‘rib’ across the bottom at the rear, also found on very early 2 inch lever caps see above. Other factors such as military marks, boxes, penciled prices compared to price lists and Woden plane instructions WPI , have assisted in confirming these dating periods. Early and mid dated planes were packed in L1 boxes and later planes in L2 boxes see packaging below.

These labels have been found on both L1 and L2 boxes.

Block Plane Dating Block Planes from the Author’s Collection A great deal of research has been dedicated to dating Stanley’s bench planes over the years, with type studies established for the Bailey and Bedrock lines, as well as many of the most popular specialty planes.

Adjustable steel sole planes concave or convex surfaces. Identical to the No 20 except has japanned finish. Cast iron, japanned finish. Skewed cutter, used to accurately square up an edge. General purpose bench plane, 9 inches long, 2 inch cutter. Cast iron, japanned finish, rosewood handles. General purpose bench plane for longer boards and doors, ideal for joining or for any smooth flat surface work.

Corrugated bottom preferred by some for working on soft woods. This plane was produced from to – WW 11 – it was made exactly the same as other planes except for steel screws to secure the handles instead of brass. Corrugated bottom, general purpose bench plane. Used for fine flat finishing. Combination plain,alligator and tap wrench.


Mouth-blown Bottles At some point in the production of all mouth-blown bottles, the fully expanded bottle must be removed from the blowpipe. Before removing the blowpipe, the bottle must first be grasped or held in some fashion; a subject covered more extensively on the Bottle Bases page. Also see snap case or pontil rod. Once securely held, the process of removing the blowpipe begins Cracking-off, bursting-off and shearing Mechanical Cracking-Off Method One interesting variation of the “cracking-off” method is found in William F.

The United States patent number for each year is the first patent issued that calendar year. A patent date is when something was patented, not when it was actually made, many items were manufactured for many years after it the patent was granted.

Developed during the fifteenth century, engraving was at first traditionally regarded as a branch of the goldsmith’s art. During the latter 15th century and into the 16th century the art of engraving was developed to a very high degree by the Italian school, often by artists who turned their hands to engraving. Rapidly following them the Nuremburg school in Germany Martin Schongauer, Durer, Van Mechens took engraving to new heights of technical perfection.

After this time the art of engraving gradually spread throughout Europe, England had resident engravers and the start of a school by around The Technique – Most plates that are classed as engraved start out by having parts of the main design etched first. Etching gives a greater freedom and ease in laying down bold areas of design, the finishing and detail then being added by pure engraving.

The engraver used a burin illustration above , or graver, which was a prism shaped bar of hardened steel with a sharp point and wooden handle.

History of ironing

Chisels come in a variety of guises. Bevelled, mortise, gouges, cranked gouges, cranked bevelled, paring, , the list goes on and on. Meaning the blades were forged, ie hammered under heat, and the resulting edges and steel composition reflected that in the quality of the blade and the edge it can hold. And these old chisels really do hold their edge. Put a standard bevel of approximately 25 degrees on them, with a further honed edge, and they are sharp! There are many different modern varieties of chisel out there now, some of them excellent, like the Lie Nielsen range.

Business of Doing Business System for Dating Country and Primitive Furniture, Part One System for Dating Country & Primitive Furniture, Part1 The Business of Doing Business in Antiques – The Journal of Antiques and Collectibles – July furniture, hinges, nails, screws.

Here’s how it works: Submit your ticket application by You’ll receive a unique application number via email, which will also include a link you can use to review your ticket application. If your ZIP code makes you eligible, you can add an online furniture submission to our ticket application at any time before the February 27 deadline see furniture details below. On or about March 8, , ticket winners will be selected in a random drawing. All applicants will receive an email in mid-March with a link to our online Ticket Checker, which you can use to find out if you’ve won tickets.

In each city on our upcoming tour, we’re looking for a few special pieces of furniture to appraise and display on the set. If yours is selected, we’ll transport it to the event, and back home again, at no cost to you. Only ticket applicants who live within a mile radius of the event venue are eligible to submit furniture in advance. The deadline to submit photos for the furniture selection process is

Auction Details

She was a teacher of English and drama, becoming head of year. Her study primarily focuses on embroidery, but her sewing activities span the needle arts, but you will see she also makes contemporary quilts. In part one of this article she shares the bone needlework collection her In-Laws have gathered over the years.

In the second part, Gloria talks about her sewing activities in England and shows us her own collection of old needlework tools, which are procured in a more modern way than her in-laws had available. They have one or two items that date from the eighteenth century but most of their items date from the nineteenth century. They have collected their pieces from antique shops, antique fairs, and car boot sales in and around Gloucestershire and Durham.

A set of 5 antique apothecary tools dating to the 18th Century of Italian origin. They include three instruments made from brass, a scoop, and two flat bladed shovels. A .

Miscellaneous body features NOTE: If unsure of some of the terminology used on this page related to the physical features of bottles, visit the General Bottle Morphology page. That page includes an illustration of a somewhat stylized “typical” bottle with the different physical “parts” morphological features pointed out; parts which are often easier to visualize than describe.

Manufacturing non-mold Based Body Features Free-blown bottle bodies Free-blown bottles were produced without the aid of a mold, being instead formed and shaped by the skills of the glassblower using manipulation of the blowpipe the use of which dates back to the 3rd century B. Free-blown utilitarian bottles found or made in the U. The were rarely produced after the s by American glass companies producing utilitarian bottles but the technique is still likely being used to some degree for specialty or artist bottles Toulouse a; empirical observations.

The bottle formed without a mould will generally not be symmetrical in body, shoulder, neck or base. There are no mold seams, no embossing, no moulded decorations, and the exterior glass surface tends to be smooth and glossy, patinated areas excepted. The lines of the bottle will not be sharp, but will flow. Although free forming of glassware can produce some of the most elaborate shapes, being free from the confining borders of the mould, simple globes and elongated shapes are the easiest to form free-hand in quantity, so that free-blown commercial containers are most likely to be these shapes.

There is a tendency for the glass to be evenly distributed in the various areas of the bottle. One additional observation is that the glass at the heel or base edge of a free-blown bottle will tend to be somewhat thicker than the rest of the bottle which will be fairly evenly distributed last “bullet” above. In addition, the heel and extreme lower body of a free-blown bottle will often flare out somewhat with the base diameter being slightly wider than the average diameter of the bottle body.

Both of these features are related and caused by a combination of the action of the tool that formed the push-up inside the base and the hot glass flowing or sagging as it was not contained by any mold surface Jones


I use to buy and sell a lot of them. Real examples are getting hard to find and there are far more new and reproduction miniature anvils on the market than there use to be which has dampened interest and hurt this collectible in more ways than just the value. Just look at eBay and you will see what I mean. Hundreds of new and reproduction anvils can be found there.

Many offered as vintage or antique using the definition of older than some.

Oct 01,  · (The prime internet forum for discussion of antique tools is probably the OLDTOOLS mailing list, although that list has a lot of discussion of the USE of the tools and most of that is woodworking rather than metalworking.).

History does not record who it was, but the incredible results of that inspirational moment are all around us – in the houses we live in, the bridges we cross, the furniture we sit on. Nails have been around for a long time. As soon as man discovered that heating iron ore could form metal, the ideas for shaping it quickly followed. Any sizeable Roman fortress would have its ‘fabrica’ or workshop where the blacksmiths would fashion the metal items needed by the army. They left behind 7 tons of nails at the fortress of Inchtuthil in Perthshire.

For nail making, iron ore was heated with carbon to form a dense spongy mass of metal which was then fashioned into the shape of square rods and left to cool. The metal produced was wrought iron. After re-heating the rod in a forge, the blacksmith would cut off a nail length and hammer all four sides of the softened end to form a point.

Then the nail maker would insert the hot nail into a hole in a nail header or anvil and with four glancing blows of the hammer would form the rosehead a shallow pyramid shape.

Finding & Buying Old Tools – Viewers Choice